วิทยุสื่อสาร ICOM รุ่น IC-V82/V82-T
รายละเอียด: คุณสมบัติ :
- ความถี่รับส่ง 144-146 MHz.
- กำลังส่ง High = 5.5 Watts.
Middle = 4 Watts.
Low = 0.5 Watt.
- 207 memory channels ( incl. 6 scan edges and 1 call Ch. )
- Frequency resolution = 5, 10, 12.5,15, 20, 25, 30, 50 kHz.
- มีฟังก์ชั่นพื้นฐาน และฟังก์ชั่นใหม่ๆมากมาย
อุปกรณ์เครื่อง :
- ตัวเครื่อง, เสายาง, แบตเตอรี Ni-Cd 1,100 mAh., แท่นชาร์จ, คลิปหลัง, คู่มือใช้งาน
- รับประกันตัวเครื่อง 1 ปี
High Power! Digital Capability!
Power to Go Anywhere!
Optional digital unit, UT-114
The optional UT-114 provides D-STAR format digital voice and slow data communication. The UT-114 includes the following digital features.
Callsign calling
In the digital mode, your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory.
Position exchange with external GPS receiver
When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible.
* NMEA 0183 output and RS-232C interface are required.
** Position mapping software required (Not supplied by Icom ).
And more digital features
- 20-character short data message
- Digital code squelch
- EMR communication
- Digital pocket beep
- Stand-by beep
5W powerful output power
A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time.
* 5W for UHF.
200 memory channels and 10 memory banks
Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting bank links.
Built-in CTCSS/DTCS
Built-in CTCSS/DTCS tone codes provide quiet stand-by and allowyou to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency.
CTCSS and DTCS Operation Standard
50 CTCSS and 104ื2 DTCS tone squelch operation codes (encode and decode) provide quiet standby and allow you repeater access. A pocket beep alerts you of a call and a tone scan can detect the sub-audible tone in use in the receiving signals.
Standard DTMF Encoder and Optional DTMF Decoder
5 DTMF memory channels with up to 24 DTMF codes allow remote operation. The optional UT-108 DTMF decoder unit provides code squelch operation as well as a pager function.
Other features
- NOAA weather channel receive * (* IC-V82 USA version only)
- Automatic repeater function (USA version only)
- Reversible control knob and up/down buttons assignment
- Durable construction and simple operation
- 16 DTMF dial memory
- PC cloning capability
SPECIFICATIONS
| GENERAL |
| Frequency range |
| : |
IC-V82 : 136-174MHz , IC-V82-T : 144-146MHz |
|
| Mode |
: F3E, F2D, F7W |
| Number of memory ch. |
: 207 (6 scan edges, 1 call) |
| Antenna connector |
: BNC (50 ohm) |
| Power supply |
: 7.2 V DC (6.0 —10.3V DC acceptable, Icom's battery pack only) |
| Frequency stability |
: ±2.5 ppm -10°C to +60°C |
| Current drain (at 7.2 V DC) |
| : |
| |
IC-V82 |
IC-V82-T |
| Tx |
High(5W) |
2.0A |
2.0A |
| Rx |
Max.Audio |
250mA |
250mA |
| Standby |
80mA |
80mA |
| Power save |
30mA |
30mA |
|
|
| |
|
Dimensions
(projections not included) |
: 54(W) ื 139(H) ื 36.7(D) mm
21⁄8(W) ื 515⁄32(H) ื 17⁄16(D)in. |
| Weight |
: 390g; 13.8oz (with BP-222N) |
| |
| TRANSMITTER |
Output power (at 7.2 V DC)
|
| : |
| |
IC-V82 |
IC-V82-T |
| High |
5.0W |
5.0W |
| Mid |
2.0W |
2.0W |
| Low |
0.5W |
0.5W |
|
|
| Spurious emissions |
: Less than -60 dB |
| Max. freq. deviation |
: 5KHz/ 2.5KHz (Wide/Narrow) |
| Ext. MIC connector |
: 3-conductor 2.5(d) mm (1⁄10″)/2.2k ohm |
| |
| RECEIVER |
| Receive system |
: Double-conversion super heterodyne |
| Intermediate frequencies |
: 1st 46.35 MHz
2nd 450 kHz |
| Sensitivity (at 12dB SINAD) |
: 0.16 V typ. |
| Squelch sensitivity (at threshold) |
: 0.11V typ. |
| Selectivity |
: more than 55/50dB (Wide/Narrow) typ. |
| Inter modulation |
: 65dB type. |
| Spurious and Image rejection |
: 80dB (typ.; VHF), 70dB (typ.; UHF) |
| Audio output power |
: 300 mW typ. with an 8 ohm load |
| Ext SP connector |
: 3-connector 3.5 (d) mm (1/8")/8 ohm |
| Exp Data connector |
: 3-connector 2.5 (d) mm(1/10") |
Supplied accessories:
< >Antenna Belt clip Desktop charger* Battery case or battery pack*
*Depending on version All stated specifications are subject to change without notice or obligation.
OPTIONS
BATTERY CASE AND BATTERY PACKS
|
